NEWS
What to do if the Dyson battery fails, such as the red light？
Date: 2023-07-13 Views: 185
Dyson vacuum battery blue steady light: Normal operating state
When you press the power button on a Dyson V8 or V10 vacuum cleaner, if the battery indicator light shows a steady blue light, it means that the vacuum cleaner is operating normally. The number of blue lights indicates the remaining battery level:
Three steady blue lights: The battery level is high, and the vacuum cleaner can be used normally.
Two steady blue lights: The battery level is moderate, and it is recommended to use the high suction mode in moderation.
One steady blue light: The battery is low, and it is recommended to reduce the use of the high suction mode before charging or charge it before use.
Although users cannot get an exact estimate of the remaining battery life based on the number of steady blue lights on the Dyson vacuum, they can rely on their experience to get a rough estimate. If the blue lights go out faster each time you use the vacuum, it may mean that the battery is gradually aging and needs to be replaced for a better user experience.
Dyson vacuum battery flashing blue light: Low power, charging
A flashing blue light on a Dyson vacuum battery usually indicates two conditions: low power or charging. Depending on the situation, the flashing blue light has a specific meaning:
Flashing blue light when you press the power button: This is a reminder of low battery power, and you should charge the battery before use.
Flashing blue light when you connect the vacuum cleaner to the charger: It means that the vacuum cleaner is charging, and the more blue lights, the closer it is to full charge.
Regardless of the situation, the flashing blue light on the Dyson battery is a normal indicator state and does not indicate a problem with the device or battery. When the blue light stops flashing and goes out, it means that the vacuum cleaner battery is fully charged, and you can use the vacuum cleaner at any time.
Dyson vacuum battery steady red light: Main unit failure
The Chinese user manual for the Dyson V8 vacuum cleaner does not mention a steady red light on the battery indicator, so some people may think that the red light is caused by a battery failure and replace the battery themselves, only to find that the problem has not been solved. In fact, the steady red light on the Dyson V8 and V10 vacuum batteries indicates a main unit failure, and you should stop using or charging it and send it for repair as soon as possible.
Dyson vacuum battery flashing red light: Battery failure
When the battery indicator light on a Dyson V8 or V10 vacuum flashes red, it indicates an abnormal signal from the battery. Dyson battery flashing red light may be due to battery failure, overheating, inability to charge, or the end of the battery life. Once you notice the flashing red light, you should take the following steps:
Stop using or charging: Immediately stop using or charging to prevent the problem from getting worse.
Let the battery cool down: Put the vacuum cleaner in a cool environment to cool down, avoiding placing it in a place that is too hot or exposed to direct sunlight.
Try again: After the battery has cooled down, try to start or charge it again to see if it can return to normal.
Send for repair: If the problem cannot be resolved, please send it for repair or replace the battery for the Dyson vacuum cleaner.
In addition, Dyson vacuum cleaners cannot be used in environments below 5 degrees Celsius to protect the battery and motor. Although users in southern China usually do not encounter this situation, users in northern China or other cold countries need to pay special attention to this.
Dyson vacuum battery flashing red light + flashing blue light: Charger failure
When the Dyson vacuum battery indicator light flashes red and blue alternately, it usually happens when the vacuum cleaner is connected to the charger because of an abnormal signal from the charger. Dyson V8 and V10 models display this in slightly different ways:
V8 model: a single LED bulb alternately flashing red and blue.
V10 model: two bulbs on the left and right alternately flashing red and blue.
Dyson V10 blockage light and filter light
The Dyson V10 vacuum cleaner is equipped with exclusive blockage and filter indicator lights, which were not introduced in the V8 model, and later models switched to using an LCD screen to display related information.
Blockage indicator light
The blockage indicator light is located next to the battery light and looks like a water pipe light, specifically used to warn of blockages in the air inlet path or cleaning head. When a blockage occurs, the indicator light will light up. Users should immediately stop using the vacuum cleaner and let it cool down. When checking the dustbin, cyclone, and extension hose, be careful not to touch the power button to avoid accidental startup.
Filter indicator light
The filter indicator light is labeled "Filter", and there is a corresponding indicator when the filter is not installed correctly or needs to be cleaned or replaced. If the filter indicator light flashes, it means that the filter is not installed correctly; if it is steady, it means that the filter needs to be cleaned or replaced. Keeping the Dyson vacuum filter clean not only helps maintain air flow and suction efficiency, but also is one of the keys to avoiding motor damage.
RELATED NEWS
CATEGORIES
LATEST NEWS
CONTACT US
Name: Anna Yan
Mobile：8618576695768
Tel：8618576695768
Whatsapp：8618576695768
Email：anna@ecyclenergy.com
Add：Room 213,Huihai Building,Longhua Disctrict,Shenzhen
